DE / EN / EUR
EN
|

TOPSELLER

TOPSELLER

PCB MAGAZINES SERIES 100, 180 and 300

PCB MAGAZINES 100, 180 and 300

DETAILS

Quick and easy assembly

The web walls are adjustable on the profile rails. Two PCBs are inserted into the outer adjustment grooves. The upper web wall is to be pressed against the PCBs and fixed with screws.

Stable and torision-resistant

The web walls are extremely stable due to the double-walled construction. In addition, the web wall can be stiffened by a mental tube in case of high mechanical and thermal stress.

Slot lock 

To prevent damage to components when inserting PCBs into the magazine, unused guides can be covered by groove locks.

Standing on edge

Assembled PCBs must be stored horizontally before soldering. For this purpose, the magazines are set upright.

Stackable

The magazines are stackable due to fixing holes and pins at the outer corners.

Transport container

For transport, the magazines can be placed in standardised containers (600 x 400 mm or 400 x 300 mm). The retractable handles facilitate insertional and removal.

PCB MAGAZINES SERIES 600, 700 and 800

PCB MAGAZINES 600, 700 and 800

PCB magazines series 600

PCB magazines series 600

Width adjustment by screw clamping

1. transport lock 

A latch is fitted to the front and rear as standard. When lifted, the latch is moved outwards and locks in the upper position. The PCBs can be pushed in or removed. When lifted again, the guides are locked.

2. screw terminals

The 600 series is a cost-effective variant. By loosening the four screw clamps, the web wall can be adjusted to the desired PCB width.

PCB magazines series 700

PCB magazines series 700

Variable width adjustment by toothed belt by hand

1. safety screw

The clamping of the toothed belt by a knurled screw prevents accidental adjustment of the moving side wall.

2. four precision spindles

For adjusting the movable side wall

3. transport lock

A latch is fitted to the front and rear as standard. When lifted, the latch moves outwards and locks in the upper position. The PCBs can be pushed in or removed. When the unit is lifted again, the guides are locked in place.

4. toothed belt

By pulling the toothed belt, the web walls are adjusted to the required PCb width.

PCB magazines series 800

PCB magazines series 800

Variable width adjustment with toothed belt motorised or by hand

1. toothed belt

For manual or automatic width adjustment

2. four precision spindles 

For adjusting the movable side wall

3. transport lock

A latch is fitted to the front and rear as standard.
Automatic mode
When the loader is inserted, it is moved outwards by a wedge. When removed, the guide is locked again. 
Manual operation
When lifting by hand, the latch is moved outwards and locks in the upper position. When lifted again, the guides are locked in place.

4. safety screw

The clamping of the toothed belt by a knurled screw prevents accidental adjusment of the moving web wall.

5. coupling disc

For motorised width adjusment

PCB magazines of the 800 series support automated production

A user report from the company Endress+Hauser

SEPARATORS

PCB magazines of the 800 series support automated production

A user report from the company Endress+Hauser

SEPARATORS

HEKTOR 2

HEKTOR 2 cuts outline-milled PCBs gently and quickly. Bars are cut out cleanly and smoothly.

MAESTRO 2, 2M

The compact MAESTRO 2 seperates PCBs quickly and economically. It requires only a small working area.

MAESTRO 3E

The MAESTRO 3E depanelling machine separates both small and large depanelling boards. The support table and the tray are infinitely adjustable to the best working position.

MAESTRO 4S

Both small and large panels are separated quickly, economically and stress-free with the MAESTRO 4S.

MAESTRO 5L

It can be used economically when large quantities of prescored PCBs have to be separated.

MAESTRO 6

Cutting of pre-scored PCBs uo to 1,500 mm in length with minimum stress on the components. The carriage drive is located directly behind the linear blade. This makes cutting and removing the PCBs much easier.

THE COMPANY

THE COMPANY

NUMBERS, DATA, FACTS

founded in 1975

nine locations in seven countries

90 million euros in group turnover in the 2019 financial year

 Market leader in automated and high-precision labelling

Europe's largest manufacturer of label printing systems

You can find more information about cab here.