Cutting, stamping and bending device for axial components
manual operation
D wire up to 1.3 mm
Delivery form: loose/belted
manual operation
up to 2,500 components/h
Compressed air operation 4-6 bar with foot switch
Weight: approx. 8 kg
Dimensions: 300 x 500 x 210 mm
Min. grid: 12.5 mm
Max. grid: 70 mm
Operating mode:
In order to enable axially wired components to be assembled quickly, they must be cut to the appropriate length and bent to the required grid before being inserted into the circuit board
The setting is displayed on the relevant device scale
The embossing for the connection pins is specific to the tool, and is implemented according to customer requirements
The device can be retrofitted for the various tools.
The component is inserted manually between the tools
These are then actuated by means of a pneumatic foot switch
The changeover for different cutting and grid dimensions takes less than a minute