ESD table mat set S Pro Plus, 600 x 600 mm, 6-piece, 2x 10 mm push button

The SafeGuard ESD Table Mat Set S Pro Plus offers a reliable solution for electronics manufacturing. The set includes six parts, including an ESD work mat measuring 600 x 400 mm and 2 mm thick. Also included are an ESD spiral cable, an ESD wrist strap, an ESD grounding plug, an ESD grounding cable, and an ESD grounding point.
The work mat is characterized by its resistance to heat and solder and is also temperature-resistant. It offers protection against chemicals and oil and is permanently elastic, abrasion-resistant, and comfortable to use. Suitable for use as a soldering mat, it meets the high standards required in electronics manufacturing. With a two-layer ESD structure (dissipative/conductive) and a surface resistance between 10⁶ and 10⁷ ohms, it ensures safety and reliability.

• Heat and solder resistant
• Temperature resistant according to Glow wire test - IEC 60335-1:2010 - up to 750°C and Needle Flame test acc. to IEC 60695-11, up to 30sec.
• Resistant to chemicals and oil
• Permanently elastic, abrasion-resistant and comfortable
• RoHS compliant
• Anti-reflective surface makes working easier
• Two-layer ESD table mat (dissipative/conductive)
• Surface resistance is 10⁶ - 10⁷ Ohm (EN 61340-2-3)

Item no.	WL45064
Model	SG-TMS-GR-GL-S PRO PLUS-2DK-600X600X2
Manufacturer	SAFEGUARD
Manufacturer article no.	SG-TMS-GR-GL-S PRO PLUS-2DK-600X600X2
Length	600 mm
Width	600 mm
Height	2 mm
Scope of delivery	ESD premium table mat, grey 600 x 600 mm - WL43386 ESD Wristband, 3 mm DK - WL42052 ESD spiral cable, 2 Mohm - WL42084 Earthing cable, L = 1.8 m - WL32120 Earthing plug, 2 x 10 mm DK - WL32123 Grounding point - WL24948
Sales unit	1 set
Content unit	1 set
Manufacturer colour information	grey
Colour	grey
Material	Natural rubber & synthetic rubber
Incl. battery	no
RoHS compliant	yes
Typical surface resistance (Rpp)	10⁶ - 10⁷ Ohm (EN 61340-2-3)
Connection	2x 10 mm press stud
Type of surface	table mat
ESD certification according to IEC 61340-5-1	yes
Temperature resistance	Glow wire test acc. to IEC 60335-1:2010 - up to 750°C
Typical volume resistivity (RV) EN 61340-2-3	10⁶ Ohm
Hardness ISO 7619	shore A 75
Material resistance/pressure EN/ISO 24343-1	< 0,20mm
Abrasion resistance ISO 4649 (Met. A-5N)	< 200 mm³
Flexibility EN/ISO 24344 (Met.AO 20mm)	yes
Flammability	Needle Flame test acc. to IEC 60695-11, bis 30sec.
Slip resistance, dynamic COF EN13893	> 0,30
Resistance to stains EN/ISO 26987	Resistant, depending on concentration and duration of contact
Resistance to oil and grease (ASTM D471)	Limited change in volume and mass
Cleaning	Use suitable ESD cleaners
Incl. earthing cable	yes
Incl. earthing point	yes
Surface	Two-layer ESD table covering
Corners	rounded
ESD compliant	yes
GPSR manufacturer data	Weidinger GmbH Hertha-Sponer-Str. 1a DE-82216 Gernlinden