Thomsit special adhesive K192 F, conductive, fiber-reinforced, 13kg

Thomsit Special Adhesive K 192 F is the ideal solution for professional floor installation and is ideal in combination with Ecostat PR 2.0 PVC flooring. This high-quality adhesive is characterized by its very low emission, electrical conductivity and its fibre-reinforced formulation with high shear strength. It combines a strong wet bonding strength with a hard, resistant adhesive joint and also impresses with its high yield. It is particularly suitable for conductive rubber floor coverings up to 4.0 mm thick with a smooth, sanded backing - both in sheets and panels - as well as for conductive PVC floor coverings on absorbent substrates that are ready to be covered. Thanks to its special properties, K 192 F is predestined for areas of application with special requirements for electrical conductivity, for example in operating theaters, server and computer rooms, laboratories or production and storage environments where there is a risk of explosion. With Thomsit K 192 F, you are choosing an adhesive that meets the highest standards in terms of occupational safety, indoor air quality and environmental compatibility.

• Fiber-reinforced with high shear strength
• Electrically conductive
• Combines good wet bonding strength with a hard adhesive joint
• Short flash-off time (boards: approx. 5 minutes; sheeting: approx. 5 - 10 minutes)
• Open time: approx. 20 - 30 minutes
• Very good workability
• Can be loaded after approx. 24 hours
• Suitable for chair castors when loaded with castors in accordance with DIN EN 12529
• < 3 x 10⁵ Ohm according to DIN EN 13415
• Temperature resistance: after setting up to max. + 50 °C
• Can be used on heated floor constructions
• Consumption: With toothing S 1 approx. 280 g/m²
• Range (per container): approx. 46 m²