Rework Station DDSE-2QF incl. T245 handpiece, DR560 desoldering iron and DDE control unit

Equipped with an MSE module, the DDSE station ensures efficient and precise desoldering thanks to its powerful extraction system. It is ideal for SMDs, high-performance applications, desoldering through-hole components and removing excess solder after removing SMDs.

Thanks to the JBC Most Efficient Soldering System, it offers the highest rework quality, while Intelligent Heat Management helps to extend tip life and reduce energy consumption.


Included in the scope of delivery:
• DDE 2-tool control unit that controls up to two tools simultaneously and is fully compatible with 13 different JBC tools, delivering up to 150 W per tool.
• T245 all-purpose handle compatible with the C245 cartridge range.
• DR560 desoldering iron compatible with the C560 tip range.
• MSE electric desoldering module with exceptional suction power for a complete desoldering process.

DDE control unit
Rated power: 200 W
Peak power: 150 W per tool
Selectable temperature: 90 to 450 ºC / 190 to 840 ºF
Temperature stability at idle (with still air): ±1.5 ºC / ±3 ºF / Meets and exceeds IPC J-STD-001F
Temperature accuracy: ±3 % (using a reference cartridge)
Temperature adjustment: ±50 ºC / ±90 ºF via the station settings menu
Voltage/resistance between tip and ground: Meets and exceeds ANSI/ESD S20.20 and IPC J-STD-001F
Ambient temperature during operation: 10 - 40 ºC / 50 - 104 ºF

Connections
USB-A:
Firmware update,
Graphics and profiles,
Dino-Lite USB microscope
(models AM2011, AM2111)

USB-B:
PC communication
RJ12:
Suction device/peripheral devices/robots

MSE module
Power: 42 W
Vacuum: 85 % / 640 mmHg / 25.4 inHg
Flow rate: 35 SLPM
Ambient temperature: 10 - 40 °C / 50 - 104 °F
Pedal connection: Yes
Complies with CE standards
ESD safe

Weight and dimensions
Control unit
232 x 148 x 120 mm / 6.07 kg.
9.13 x 5.83 x 4.72 in / 13.38 lb.
Packaging
425 x 360 x 433 mm / 10.59 kg.
16.73 x 14.17 x 17.05 in / 23.35 lb.