Soldering station B-Iron 500 Dual with 2x B.500 Tool, without portable display

B.IRON DUAL 500 was specially developed for continuous use in mass production.

It performs up to 500 medium-sized SMD solder joints per charge.

By adding an additional tool, this station can be converted into a double tool station. Both tools can be controlled in real time.

Included in the scope of delivery:
• B.500 tool (2 pieces), which is fully compatible with the C210 cartridge range. It also has an energy-saving mode that can be activated by putting on the cap.
• Charging station for automatic charging of the cabin tools when they are placed in the tool holder.
• Attention: Portable display is not included in the scope of delivery

It also has a quick cartridge changer that enables safe and easy cartridge changes, a tip cleaner with brass wool and a spray protection membrane.

Charging station
Input voltage: 100 V - 240 V, 50/60 Hz
Power: 40 W
Tool output: 12 V / 1500 mA
USB output: 5 V / 1000 mA

Tool output
Peak output power: 24 W
Battery: Li-Ion 7.4 V / 750 mAh
Charging time: 60 minutes
Selectable temperature: 100 to 450 ºC / 210 to 840 ºF
Temperature stability at idle (with still air): ±1.5 °C / ±3 °F
Temperature accuracy: ± 3 % (when using a reference cartridge)
Connectivity: Bluetooth Low Energy (BLE)
Ambient temperature: 10 to 50 °C / 50 to 122 °F
Weight of the device: 70 g / 0.154 lb

CONSOLE
Screen size: 8.6"
Connectivity: Bluetooth 5.0
Battery: Li-Ion 3.7 V / 5000 mAh

Weight and dimensions
B.IRON battery-powered system
233 x 202 x 211 mm / 2.23 kg.
9.17 x 7.95 x 8.31 in / 4.92 lb.
Packaging
265 x 243 x 160 mm / 2.85 kg.
10.43 x 9.57 x 6.30 in / 6.28 lb.

ESD Note:
All B.IRON components comply with CE standards, but the tool itself is not grounded. Therefore, to comply with ESD regulations, the user of the B.IRON tool must be ESD grounded.