ESD table mat Premium, blue, 400 x 400 x 2 mm, cut to size with 2x 10 mm push button

Discover the SafeGuard ESD table mat Premium in black, the ultimate solution for your electronics production. With its heat and solder resistance, this mat is not only ideal for soldering work, but can also be used as a soldering mat. Thanks to its chemical and oil resistance, it can withstand even the most demanding working conditions. The permanently elastic nature prevents annoying rolling up and ensures a pleasant working environment.
The SafeGuard ESD table covering Premium is not only hard-wearing and abrasion-resistant, but also complies with RoHS standards. The two-layer ESD table mat with dissipative and conductive properties ensures a surface resistance between 10⁶ and 10⁷ ohms in accordance with EN 61340-2-3. With a size of 1220 x 10000 x 2 mm, this roll product offers sufficient space for your work surface.
The anti-reflective surface of the table covering makes working even more efficient and pleasant.

• Heat and solder resistant
• Temperature resistant according to Glow wire test - IEC 60335-1:2010 - up to 750°C and Needle Flame test acc. to IEC 60695-11, up to 30sec.
• Resistant to chemicals and oil
• Permanently elastic, abrasion-resistant and comfortable
• RoHS compliant
• Anti-reflective surface makes working easier
• Two-layer ESD table mat (dissipative/conductive)
• Surface resistance is 10⁶ - 10⁷ Ohm (EN 61340-2-3)

Item no.	WL54960
Model	SG-TM-BL-GL-2DK-400X400X2
Manufacturer	SAFEGUARD
Manufacturer article no.	SG-TM-BL-GL-2DK-400X400X2
Length	400 mm
Width	400 mm
Height	2 mm
Sales unit	1 piece
Content unit	1 piece
Colour	blue
Manufacturer colour information	blue
Colour	blue
Material	Natural rubber & synthetic rubber
RoHS compliant	yes
Typical surface resistance (Rpp)	10⁶ - 10⁷ Ohm (EN 61340-2-3)
Connection	2x 10 mm press stud
Type of surface	table mat
ESD certification according to IEC 61340-5-1:2016	yes
Temperature resistance	Glow wire test acc. to IEC 60335-1:2010 - up to 750°C
Typical volume resistivity (RV) EN 61340-2-3	10⁶ Ohm
Hardness ISO 7619	shore A 75
Material resistance/pressure EN/ISO 24343-1	< 0,20mm
Abrasion resistance ISO 4649 (Met. A-5N)	< 200mm3
Flexibility EN/ISO 24344 (Met.AO 20mm)	yes
Flammability	Needle Flame test acc. to IEC 60695-11, bis 30sec.
Slip resistance, dynamic COF EN13893	> 0,30
Resistance to stains EN/ISO 26987	Resistant, depending on concentration and duration of contact
Resistance to oil and grease (ASTM D471)	Limited change in volume and mass
Surface	Two-layer ESD tabletop
Corners	rounded
ESD compliant	yes
GPSR manufacturer data	Weidinger GmbH Hertha-Sponer-Str. 1a DE-82216 Gernlinden