ESD table mat Premium, light blue, 600 x 900 x 2 mm, cut to size with 2x 10 mm push button

The SafeGuard ESD Premium Table Mat in light blue measures 600 x 900 x 2 mm and is equipped with two 10-mm snap fasteners. This heat- and solder-resistant mat withstands temperatures up to 750°C according to the glow wire test (IEC 60335-1:2010) and the needle flame test (IEC 60695-11) for up to 30 seconds, making it suitable for use as a soldering mat. It also offers excellent resistance to chemicals and oils, as well as a permanently elastic, abrasion-resistant, and comfortable texture. RoHS compliance ensures environmentally friendly use. Its anti-reflective surface makes working easier. This two-layer ESD table mat (dissipative/conductive) has a surface resistance of 10⁶–10⁷ ohms (EN 61340-2-3). Ideal for use in electronics manufacturing.

• Heat and solder resistant
• Temperature resistant according to Glow wire test - IEC 60335-1:2010 - up to 750°C and Needle Flame test acc. to IEC 60695-11, up to 30sec.
• Resistant to chemicals and oil
• Permanently elastic, abrasion-resistant and comfortable
• RoHS compliant
• Anti-reflective surface makes working easier
• Two-layer ESD table mat (dissipative/conductive)
• Surface resistance is 10⁶ - 10⁷ Ohm (EN 61340-2-3)

Item no.	WL34495
Model	SG-TM-HB-GL-2DK-900X600X2
Manufacturer	SAFEGUARD
Manufacturer article no.	SG-TM-HB-GL-2DK-900X600X2
Length	900 mm
Width	600 mm
Height	2 mm
Sales unit	1 piece
Content unit	1 piece
Manufacturer colour information	light blue
Colour	blue
Material	Natural rubber & synthetic rubber
Incl. battery	no
RoHS compliant	yes
Typical surface resistance (Rpp)	10⁶ - 10⁷ Ohm (EN 61340-2-3)
Connection	2x 10 mm press stud
Type of surface	table mat
ESD certification according to IEC 61340-5-1	yes
Temperature resistance	Glow wire test acc. to IEC 60335-1:2010 - up to 750°C
Typical volume resistivity (RV) EN 61340-2-3	10⁶ Ohm
Hardness ISO 7619	shore A 75
Material resistance/pressure EN/ISO 24343-1	< 0,20mm
Abrasion resistance ISO 4649 (Met. A-5N)	< 200 mm³
Flexibility EN/ISO 24344 (Met.AO 20mm)	yes
Flammability	Needle Flame test acc. to IEC 60695-11, bis 30sec.
Slip resistance, dynamic COF EN13893	> 0,30
Resistance to stains EN/ISO 26987	Resistant, depending on concentration and duration of contact
Resistance to oil and grease (ASTM D471)	Limited change in volume and mass
Cleaning	Use suitable ESD cleaners
Surface	Two-layer ESD table covering
Corners	rounded
ESD compliant	yes
GPSR manufacturer data	Weidinger GmbH Hertha-Sponer-Str. 1a DE-82216 Gernlinden