ESD table mat Premium, grey, 600 x 1200 x 2 mm, cut to size with 2x 10 mm push button

With a generous size of 600 x 1200 x 2 mm and equipped with 2x 10 mm press studs, the SafeGuard ESD table mat in gray offers a number of advantages that make it an indispensable product in electronics production.
The SafeGuard ESD table mat, which can also be used as a soldering mat, is not only heat and solder resistant, but also temperature resistant up to 750°C according to strict test procedures. The chemical and oil resistance ensure a long service life, while the permanently elastic and abrasion-resistant surface enables comfortable working. With RoHS conformity, you can rest assured that this product complies with the latest environmental standards.
The two-layer ESD table mat offers both dissipative and conductive properties, with a surface resistance of 10⁶ - 10⁷ Ohm in accordance with EN 61340-2-3. The anti-reflective surface helps to optimize work processes and ensure precise work.

• Heat and solder resistant
• Temperature resistant according to Glow wire test - IEC 60335-1:2010 - up to 750°C and Needle Flame test acc. to IEC 60695-11, up to 30sec.
• Resistant to chemicals and oil
• Permanently elastic, abrasion-resistant and comfortable
• RoHS compliant
• Anti-reflective surface makes working easier
• Two-layer ESD table mat (dissipative/conductive)
• Surface resistance is 10⁶ - 10⁷ Ohm (EN 61340-2-3)

Item no.	WL34498
Model	SG-TM-GR-GL-2DK-1200X600X2
Manufacturer	SAFEGUARD
Manufacturer article no.	SG-TM-GR-GL-2DK-1200X600X2
Length	1200 mm
Width	600 mm
Height	2 mm
Sales unit	1 piece
Content unit	1 piece
Manufacturer colour information	grey
Colour	grey
Material	Natural rubber & synthetic rubber
Incl. battery	no
RoHS compliant	yes
Typical surface resistance (Rpp)	10⁶ - 10⁷ Ohm (EN 61340-2-3)
Connection	2x 10 mm press stud
Type of surface	table mat
ESD certification according to IEC 61340-5-1:2016	yes
Temperature resistance	Glow wire test acc. to IEC 60335-1:2010 - up to 750°C
Typical volume resistivity (RV) EN 61340-2-3	10⁶ Ohm
Hardness ISO 7619	shore A 75
Material resistance/pressure EN/ISO 24343-1	< 0,20mm
Abrasion resistance ISO 4649 (Met. A-5N)	< 200 mm³
Flexibility EN/ISO 24344 (Met.AO 20mm)	yes
Flammability	Needle Flame test acc. to IEC 60695-11, bis 30sec.
Slip resistance, dynamic COF EN13893	> 0,30
Resistance to stains EN/ISO 26987	Resistant, depending on concentration and duration of contact
Resistance to oil and grease (ASTM D471)	Limited change in volume and mass
Surface	Two-layer ESD table covering
Corners	rounded
ESD compliant	yes
GPSR manufacturer data	Weidinger GmbH Hertha-Sponer-Str. 1a DE-82216 Gernlinden