ESD table mat Premium, grey, 600 x 600 x 2 mm, cut to size with 2x 10 mm push button

Discover the SafeGuard ESD table mat in gray, which is the perfect choice for electronics production with its outstanding properties and unique selling points. With a size of 600 x 600 x 2 mm and 2x 10 mm press studs, it not only offers a generous work surface, but is also easy to use.
The ESD table mat from SafeGuard impresses with its heat and solder resistance, which also makes it ideal for use as a soldering mat. Thanks to its temperature resistance of up to 750°C in accordance with the glow wire test to IEC 60335-1:2010 and the needle flame test to IEC 60695-11 for up to 30 seconds, it also proves its worth in demanding applications.
The mat also scores points for its resistance to chemicals and oil, providing reliable protection even under adverse conditions. Its permanent elasticity ensures that it no longer rolls up, while its abrasion resistance guarantees a long service life. Comfortable and ergonomically designed, it is pleasant to work on.
The SafeGuard ESD desk mat is RoHS-compliant and has an anti-reflective surface that makes working easier. As a two-layer ESD table mat (dissipative and conductive), it guarantees a surface resistance of 10⁶ to 10⁷ ohms in accordance with EN 61340-2-3.

• Heat and solder resistant
• Temperature resistant according to Glow wire test - IEC 60335-1:2010 - up to 750°C and Needle Flame test acc. to IEC 60695-11, up to 30sec.
• Resistant to chemicals and oil
• Permanently elastic, abrasion-resistant and comfortable
• RoHS compliant
• Anti-reflective surface makes working easier
• Two-layer ESD table mat (dissipative/conductive)
• Surface resistance is 10⁶ - 10⁷ Ohm (EN 61340-2-3)

Item no.	WL43386
Model	SG-TM-GR-GL-2DK-600X600X2
Manufacturer	SAFEGUARD
Manufacturer article no.	SG-TM-GR-GL-2DK-600X600X2
Length	600 mm
Width	600 mm
Height	2 mm
Sales unit	1 piece
Content unit	1 piece
Manufacturer colour information	grey
Colour	grey
Material	Natural rubber & synthetic rubber
Incl. battery	no
RoHS compliant	yes
Typical surface resistance (Rpp)	10⁶ - 10⁷ Ohm (EN 61340-2-3)
Connection	2x 10 mm press stud
Type of surface	table mat
ESD certification according to IEC 61340-5-1	yes
Temperature resistance	Glow wire test acc. to IEC 60335-1:2010 - up to 750°C
Typical volume resistivity (RV) EN 61340-2-3	10⁶ Ohm
Hardness ISO 7619	shore A 75
Material resistance/pressure EN/ISO 24343-1	< 0,20mm
Abrasion resistance ISO 4649 (Met. A-5N)	< 200 mm³
Flexibility EN/ISO 24344 (Met.AO 20mm)	yes
Flammability	Needle Flame test acc. to IEC 60695-11, bis 30sec.
Slip resistance, dynamic COF EN13893	> 0,30
Resistance to stains EN/ISO 26987	Resistant, depending on concentration and duration of contact
Resistance to oil and grease (ASTM D471)	Limited change in volume and mass
Cleaning	Use suitable ESD cleaners
Surface	Two-layer ESD table covering
Corners	rounded
ESD compliant	yes
GPSR manufacturer data	Weidinger GmbH Hertha-Sponer-Str. 1a DE-82216 Gernlinden