ESD table cover Premium, light blue 600 x 10000 x 2 mm, roll material

The SafeGuard ESD table covering in platinum gray is the ideal solution for your electronics production. Measuring 600 x 10000 x 2 mm, the roll product offers a heat- and solder-resistant surface that can also be used as a soldering mat. It is temperature-resistant up to 750°C in accordance with the glow wire test to IEC 60335-1:2010 and the needle flame test to IEC 60695-11 for up to 30 seconds. The chemical and oil resistance ensure a long service life, while the permanently elastic nature prevents the ESD table mat from rolling up. RoHS-compliant and equipped with a two-layer ESD structure (dissipative/conductive), the surface resistance is between 10⁶ and 10⁷ ohms in accordance with EN 61340-2-3. The anti-reflective surface makes working even easier.

• Heat and solder resistant
• Temperature resistant according to Glow wire test - IEC 60335-1:2010 - up to 750°C and Needle Flame test acc. to IEC 60695-11, up to 30sec.
• Resistant to chemicals and oil
• Permanently elastic, abrasion-resistant and comfortable
• RoHS compliant
• Anti-reflective surface makes working easier
• Two-layer ESD table mat (dissipative/conductive)
• Surface resistance is 10⁶ - 10⁷ Ohm (EN 61340-2-3)

Item no.	WL43664
Model	SG-TBRO-HB-GL-ODK-10000X600X2
Manufacturer	SAFEGUARD
Manufacturer article no.	SG-TBRO-HB-GL-ODK-10000X600X2
Length	10000 mm
Width	600 mm
Height	2 mm
Sales unit	1 rolls
Content unit	1 rolls
Colour	light blue
Manufacturer colour information	light blue
Colour	blue
Material	Natural rubber & synthetic rubber
RoHS compliant	yes
Typical surface resistance (Rpp)	10⁶ - 10⁷ Ohm (EN 61340-2-3)
Type of surface	table cover
ESD certification according to IEC 61340-5-1:2016	yes
Temperature resistance	Glow wire test acc. to IEC 60335-1:2010 - up to 750°C
Typical volume resistivity (RV) EN 61340-2-3	10⁶ Ohm
Hardness ISO 7619	shore A 75
Material resistance/pressure EN/ISO 24343-1	< 0,20mm
Abrasion resistance ISO 4649 (Met. A-5N)	< 200mm3
Flexibility EN/ISO 24344 (Met.AO 20mm)	yes
Flammability	Needle Flame test acc. to IEC 60695-11, bis 30sec.
Slip resistance, dynamic COF EN13893	> 0,30
Resistance to stains EN/ISO 26987	Resistant, depending on concentration and duration of contact
Resistance to oil and grease (ASTM D471)	Limited change in volume and mass
Incl. earthing cable	no
Incl. earthing point	no
Surface	Two-layer ESD table covering
Corners	angular
ESD compliant	yes
GPSR manufacturer data	Weidinger GmbH Hertha-Sponer-Str. 1a DE-82216 Gernlinden