WCU High Precision Temperature Device
The compact and highly accurate WCU temperature meter from Weller can quickly perform the most accurate temperature measurements. It is specially designed for users who need to quickly and easily complete a temperature measurement with the highest accuracy. It has a large display without backlight.
• High mobility: Weller's battery-powered, high-precision temperature meter with a compact design can be easily used at various workstations
• ESD-safe: Weller's high-precision temperature measuring device WCU is ESD-safe
• Intuitive navigation: digital display for quick change of temperature unit between °C and °F and other functionalities. Values are easy to read on the large display without backlight.
• Max Hold Function: WCU display shows/holds the maximum measured temperature.
• Temperature measurement count function: number of peak temperature measurements is automatically counted. This function can be useful for sensor control.
• Replacement sensor WCU: 10 pcs T0058771712
• Low power consumption: auto power off timer saves battery charge and turns off the device after 10 minutes without use
• Simultaneous use of thermocross and thermocouple: Simultaneous monitoring of soldering tip and solder bath temperatures. (Weller thermocouple type K Ø 0, 1 mm T0058755782) (Weller thermocouple type K Ø 0, 5 mm T0053119099)
• Quick and easy measurement: effortless auto-calibration in less than 10 seconds, allowing the operator to focus on the important soldering tasks and get a precise temperature for best productivity. The auto-calibration function can be used with the following instruments: WX 1, WX 2, WXD 2, WXA 2, WXR 3, WXsmart NOTE: An RS-232 cable (part number: T0058764710) must be purchased separately for the auto-calibration function.
• High-precision temperature measuring instrument: Fast and accurate temperature measurements
• Applicable sensor K (CA) type thermocouple
• Ambient temperature 0 °C - 40 °C
• Weight in oz 4.23
• Temperature measurement range thermocouple 0°C - 400°C, 32°F - 752°F
• Weight (approx.) in kg 0.22
• Humidity range max. 80% relative humidity, without condensation
• Temperature measuring range Type-K thermocouple °C -150°C - +1200°C, - 302°F - + 2192°F
• Power source 9 V dry cell alkaline battery recommended
• ESD safe on
• Weight in g 120
• Dimensions L x W x H (inches) 5.43 x 2.87 x 1.69
• Dimensions L x W x H (mm) 138 x 73 x 43
• High mobility: Weller's battery-powered, high-precision temperature meter with a compact design can be easily used at various workstations
• ESD-safe: Weller's high-precision temperature measuring device WCU is ESD-safe
• Intuitive navigation: digital display for quick change of temperature unit between °C and °F and other functionalities. Values are easy to read on the large display without backlight.
• Max Hold Function: WCU display shows/holds the maximum measured temperature.
• Temperature measurement count function: number of peak temperature measurements is automatically counted. This function can be useful for sensor control.
• Replacement sensor WCU: 10 pcs T0058771712
• Low power consumption: auto power off timer saves battery charge and turns off the device after 10 minutes without use
• Simultaneous use of thermocross and thermocouple: Simultaneous monitoring of soldering tip and solder bath temperatures. (Weller thermocouple type K Ø 0, 1 mm T0058755782) (Weller thermocouple type K Ø 0, 5 mm T0053119099)
• Quick and easy measurement: effortless auto-calibration in less than 10 seconds, allowing the operator to focus on the important soldering tasks and get a precise temperature for best productivity. The auto-calibration function can be used with the following instruments: WX 1, WX 2, WXD 2, WXA 2, WXR 3, WXsmart NOTE: An RS-232 cable (part number: T0058764710) must be purchased separately for the auto-calibration function.
• High-precision temperature measuring instrument: Fast and accurate temperature measurements
• Applicable sensor K (CA) type thermocouple
• Ambient temperature 0 °C - 40 °C
• Weight in oz 4.23
• Temperature measurement range thermocouple 0°C - 400°C, 32°F - 752°F
• Weight (approx.) in kg 0.22
• Humidity range max. 80% relative humidity, without condensation
• Temperature measuring range Type-K thermocouple °C -150°C - +1200°C, - 302°F - + 2192°F
• Power source 9 V dry cell alkaline battery recommended
• ESD safe on
• Weight in g 120
• Dimensions L x W x H (inches) 5.43 x 2.87 x 1.69
• Dimensions L x W x H (mm) 138 x 73 x 43
| Item no. | WL71101 |
| Model | WCU |
| Manufacturer | WELLER |
| Manufacturer article no. | T0053450199 |
| Width | 210 mm |
| Depth | 60 mm |
| Length with packaging | 210 mm |
| Width with packaging | 72 mm |
| Height with packaging | 60 mm |
| Sales unit | 1 piece |
| Content unit | 1 piece |
| Battery included | ✔ |
| Thickness | 72 mm |
| ESD compliant | yes |
| GPSR manufacturer data | WELLER Tools GmbH Carl-Benz-Strasse 2 DE-74354 Besigheim www.weller.eu |
€398.87
Available soon
Item No.WL71101
Skip product gallery
Accessories
Sensors for WCU, 10 pieces
Available soon
Item No.
WL71100
Manufacturer No.
T0058771712
Price on request
WX connecting cable, 2 m
Regular price:
€14.90
Available
Item No.
WL26432
Manufacturer No.
T0058764710
Thermosensor for WCB2 + WHP3000
Regular price:
€201.93
Available soon
Item No.
WL23537
Manufacturer No.
T0058755782
Thermosensor for WCB2 + WHP3000
Regular price:
€124.96
Available soon
Item No.
WL16476
Manufacturer No.
T0053119099