SGT Pro grounding tester, LCD display, incl. double foot electrode

The SafeGuard SGT Pro is an easy-to-use test device for checking personal grounding before entering an ESD protected area (EPA). Its rugged design makes it suitable when speed and safety are important factors due to the large number of inputs. The tester is equipped with the LIGHT BAR system and has a metal touch probe. The results are indicated by LED lights and a signal tone. The test method can be adjusted according to the input specifications: Footwear only testing or combined footwear and wrist strap/ESD protective clothing testing. Thanks to the double foot electrode, the tester simultaneously measures the resistance of the right and left foot in relation to the hand. After the test, the results are displayed on the built-in LCD display. The tester can be connected to a gate via the relay output (e.g. turnstile entrance gate, swing gate, etc.). It can be mounted in an entrance area, on a table or on a wall. The tester is supplied with calibration certificate, double foot electrode, mounting plate and universal bracket.

• Test device for checking personal earthing before entering an ESD-protected area (EPA)
• Simultaneous testing of footwear and the ESD wrist strap/ESD protective clothing
• For testing ESD-compliant workwear
• Display of the test result on the LCD display
• Display with LED light and sound
• Selectable test modes: testing of footwear only or combined testing of footwear and wrist strap/ESD protective clothing
• For indoor use only
• Complies with the requirements of IEC 61340-5-1, ANSI/ESD S20.20
• Complies with Directive 2001/95/EC (General Product Safety)
• Standard setting when measuring footwear: 100 K Ohm - 100 M Ohm
• Standard setting when measuring wrist strap/ESD protective clothing: 750 K Ohm - 35 M Ohm
• Test voltage : 100 V DC
• Connection wrist strap/ESD protective clothing: Combined 10 mm push button, 4 mm banana plug socket
• Power supply: 12 V DC
• Relay outputs: 0.5 A/60 V
• Pass relay (open as standard) with green cable
• Fault relay (open as standard) with red cable
• Complies with the requirements of IEC 61340-5-1, ANSI/ESD S20.20
• Complies with Directive 2001/95/EC (General Product Safety)
• Dimensions: 215 x 195 x 55 mm (test device)
• Touch button protrudes above it
• Tester protrudes 14 cm to the rear over the platform.
• Size of the platform itself: 500 x 490 x 20 mm.
• Inclination angle of the stand: 5 degrees