ESD table mat set XS Pro, 600 x 400 mm, 5 pieces, 2x 10 mm push button

Discover the SafeGuard ESD table mat set S Pro - the optimum solution for your electronics production. This set impresses with its outstanding properties and unique selling points. The two-layer ESD table mat in the size 600 x 600 mm not only offers heat and solder resistance, but is also resistant to chemicals and oil. Thanks to its permanent elasticity, it remains flat and does not roll up, providing you with a comfortable working environment. The discharge resistances between 10⁶ and 10⁷ ohms guarantee safe discharge of electrostatic charges.
The set also includes an ESD spiral cable with 2 MOhm, an ESD wrist strap and other accessories for comprehensive ESD protection. The high-quality materials and ROHS conformity make this set the ideal choice for demanding applications in electronics production.

• Heat and solder resistant
• Temperature resistant according to Glow wire test - IEC 60335-1:2010 - up to 750°C and Needle Flame test acc. to IEC 60695-11, up to 30sec.
• Resistant to chemicals and oil
• Permanently elastic, abrasion-resistant and comfortable
• RoHS compliant
• Anti-reflective surface makes working easier
• Two-layer ESD table mat (dissipative/conductive)
• Surface resistance is 10⁶ - 10⁷ Ohm (EN 61340-2-3)

Item no.	WL45059
Model	SG-TMS-GR-GL-XS PRO-2DK-400X600X2
Manufacturer	SAFEGUARD
Manufacturer article no.	SG-TMS-GR-GL-XS PRO-2DK-400X600X2
Length	400 mm
Width	600 mm
Height	2 mm
Scope of delivery	ESD premium table mat, grey 600 x 400 mm - WL43385 ESD Wristband, 3 mm DK - WL42052 ESD spiral cable, 2 Mohm - WL42084 Earthing cable, L = 1.8 m - WL32120 Earthing plug, 2 x 10 mm DK - 32123
Sales unit	1 set
Content unit	1 set
Colour	grey
Manufacturer colour information	grey
Colour	grey
Material	Natural rubber & synthetic rubber
RoHS compliant	yes
Typical surface resistance (Rpp)	10⁶ - 10⁷ Ohm (EN 61340-2-3)
Connection	2x 10 mm press stud
Type of surface	table mat
ESD certification according to IEC 61340-5-1:2016	yes
Temperature resistance	Glow wire test acc. to IEC 60335-1:2010 - up to 750°C
Typical volume resistivity (RV) EN 61340-2-3	10⁶ Ohm
Hardness ISO 7619	shore A 75
Material resistance/pressure EN/ISO 24343-1	< 0,20mm
Abrasion resistance ISO 4649 (Met. A-5N)	< 200mm3
Flexibility EN/ISO 24344 (Met.AO 20mm)	yes
Flammability	Needle Flame test acc. to IEC 60695-11, bis 30sec.
Slip resistance, dynamic COF EN13893	> 0,30
Resistance to stains EN/ISO 26987	Resistant, depending on concentration and duration of contact
Resistance to oil and grease (ASTM D471)	Limited change in volume and mass
Incl. earthing cable	yes
Surface	Two-layer ESD table covering
Corners	rounded
ESD compliant	yes
GPSR manufacturer data	Weidinger GmbH Hertha-Sponer-Str. 1a DE-82216 Gernlinden