ESD table mat set L Pro, 600 x 1200 mm, 5-piece, 2x 10 mm push button

The SafeGuard ESD Table Mat Set L Pro, consisting of 5 pieces, is the ideal solution for electronics manufacturing. The ESD work mat, measuring 600 x 900 mm and 2 mm thick, features a heat- and solder-resistant surface that can also be used as a soldering mat. The two-layer ESD work mat is chemical- and oil-resistant and permanently elastic, preventing it from rolling up. The surface resistance ranges from 10⁶ to 10⁷ ohms, ensuring the safe dissipation of static charges. RoHS-compliant and available in an attractive shade of yellow, this set is the ideal addition to any electronics manufacturing workstation. With additional ESD accessories such as the coiled cable, wrist strap, and grounding plug, the set offers a comprehensive solution for the safe handling of sensitive electronic components. Get the SafeGuard ESD Table Mat Set L Pro today and ensure efficiency and safety in your manufacturing environment.

• Heat and solder resistant
• Temperature resistant according to Glow wire test - IEC 60335-1:2010 - up to 750°C and Needle Flame test acc. to IEC 60695-11, up to 30sec.
• Resistant to chemicals and oil
• Permanently elastic, abrasion-resistant and comfortable
• RoHS compliant
• Anti-reflective surface makes working easier
• Two-layer ESD table mat (dissipative/conductive)
• Surface resistance is 10⁶ - 10⁷ Ohm (EN 61340-2-3)

Item no.	WL45062
Model	SG-TMS-GR-GL-L PRO-2DK-1200X600X2
Manufacturer	SAFEGUARD
Manufacturer article no.	SG-TMS-GR-GL-L PRO-2DK-1200X600X2
Length	1200 mm
Width	600 mm
Height	2 mm
Scope of delivery	ESD premium table mat, grey 600 x 1200 mm - WL34498 ESD wrist strap, 3 mm DK - WL42052 ESD spiral cable, 2 Mohm - WL42084 Earth cable, L = 1.8 m - WL32120 Grounding plug, 2 x 10 mm DK - 32123
Sales unit	1 set
Content unit	1 set
Manufacturer colour information	grey
Colour	grey
Material	Natural rubber & synthetic rubber
Incl. battery	no
RoHS compliant	yes
Typical surface resistance (Rpp)	10⁶ - 10⁷ Ohm (EN 61340-2-3)
Connection	2x 10 mm press stud
Type of surface	table mat
ESD certification according to IEC 61340-5-1	yes
Temperature resistance	Glow wire test acc. to IEC 60335-1:2010 - up to 750°C
Typical volume resistivity (RV) EN 61340-2-3	10⁶ Ohm
Hardness ISO 7619	shore A 75
Material resistance/pressure EN/ISO 24343-1	< 0,20mm
Abrasion resistance ISO 4649 (Met. A-5N)	< 200 mm³
Flexibility EN/ISO 24344 (Met.AO 20mm)	yes
Flammability	Needle Flame test acc. to IEC 60695-11, bis 30sec.
Slip resistance, dynamic COF EN13893	> 0,30
Resistance to stains EN/ISO 26987	Resistant, depending on concentration and duration of contact
Resistance to oil and grease (ASTM D471)	Limited change in volume and mass
Cleaning	Use suitable ESD cleaners
Incl. earthing cable	yes
Surface	Two-layer ESD table covering
Corners	rounded
ESD compliant	yes
GPSR manufacturer data	Weidinger GmbH Hertha-Sponer-Str. 1a DE-82216 Gernlinden