ESD table mats set L Pro Swiss, 600 x 1200 mm, Swiss grounding plug, 5-piece
SafeGuard offers a high quality ESD table mat in gray. This premium table mat is heat and solder resistant, chemical and oil resistant as well as permanently elastic, abrasion resistant and comfortable. The two-layer mat (dissipative/conductive) has a surface resistance of between 10⁷ and 10⁸ ohms. RoHS-compliant and with an anti-reflective surface for easy working.
• Heat and solder resistant
• Temperature resistant according to Glow wire test - IEC 60335-1:2010 - up to 750°C and Needle Flame test acc. to IEC 60695-11, up to 30sec.
• Resistant to chemicals and oil
• Permanently elastic, abrasion-resistant and comfortable
• RoHS compliant
• Anti-reflective surface makes working easier
• Two-layer ESD table mat (dissipative/conductive)
• Surface resistance is 10⁶ - 10⁷ Ohm (EN 61340-2-3)
• Heat and solder resistant
• Temperature resistant according to Glow wire test - IEC 60335-1:2010 - up to 750°C and Needle Flame test acc. to IEC 60695-11, up to 30sec.
• Resistant to chemicals and oil
• Permanently elastic, abrasion-resistant and comfortable
• RoHS compliant
• Anti-reflective surface makes working easier
• Two-layer ESD table mat (dissipative/conductive)
• Surface resistance is 10⁶ - 10⁷ Ohm (EN 61340-2-3)
| Item no. | WL45070 |
| Model | SG-TMS-GR-GL-L PRO SWISS-3DK-1200X600X2 |
| Manufacturer | SAFEGUARD |
| Manufacturer article no. | SG-TMS-GR-GL-L PRO SWISS-3DK-1200X600X2 |
| Length | 1200 mm |
| Width | 600 mm |
| Height | 2 mm |
| Scope of delivery | ESD premium table mat, grey 600 x 1200 mm - WL34498 ESD Wristband, 3 mm DK - WL42052 ESD spiral cable, 2 Mohm - WL42084 Earthing cable, L = 1.5 m - WL23899 Earthing plug, 3 x 10 mm DK - WL34197 |
| Sales unit | 1 set |
| Content unit | 1 set |
| Manufacturer colour information | grey |
| Colour | grey |
| Material | Natural rubber & synthetic rubber |
| Incl. battery | no |
| RoHS compliant | yes |
| Typical surface resistance (Rpp) | 10⁶ - 10⁷ Ohm (EN 61340-2-3) |
| Connection | 3x 10 mm press stud |
| Type of surface | table mat |
| ESD certification according to IEC 61340-5-1 | yes |
| Temperature resistance | Glow wire test acc. to IEC 60335-1:2010 - up to 750°C |
| Typical volume resistivity (RV) EN 61340-2-3 | 10⁶ Ohm |
| Hardness ISO 7619 | shore A 75 |
| Material resistance/pressure EN/ISO 24343-1 | < 0,20mm |
| Abrasion resistance ISO 4649 (Met. A-5N) | < 200 mm³ |
| Flexibility EN/ISO 24344 (Met.AO 20mm) | yes |
| Flammability | Needle Flame test acc. to IEC 60695-11, bis 30sec. |
| Slip resistance, dynamic COF EN13893 | > 0,30 |
| Resistance to stains EN/ISO 26987 | Resistant, depending on concentration and duration of contact |
| Resistance to oil and grease (ASTM D471) | Limited change in volume and mass |
| Cleaning | Use suitable ESD cleaners |
| Incl. earthing cable | yes |
| Surface | Two-layer ESD table covering |
| Corners | rounded |
| ESD compliant | yes |
| GPSR manufacturer data | Weidinger GmbH Hertha-Sponer-Str. 1a DE-82216 Gernlinden |